GingerbreadPC - Winter 2002

This PC was created for Intel as a "holiday mod."  I had a tons of fun making this one.  The PC is 100% non-perishable.

The icing was made with weather-stripping caulk.
The gingerbread walls were made with hardboard (basically pegboard without the holes).
The fake candies and other decorations were bought from Hobby Lobby.
HDD, DVDRom, PSU are mounted on underside of platform (see in-the-making pics below)

Questions? Comments? [email protected]

See other weird computers I've made

GingerbreadPC01.JPG
Front-right view
GingerbreadPC02.JPG
Top-right view
GingerbreadPC03.JPG
Top-right rear view
GingerbreadPC04.JPG
Right side view
GingerbreadPC05.JPG
Back-right view
GingerbreadPC06.JPG
Back-left view
GingerbreadPC07.JPG
Left side view
GingerbreadPC08.JPG
Front-Left view
GingerbreadPC09.JPG
Top Front view
GingerbreadPC10.JPG
Another front-right view
GingerbreadPC11.JPG
Another front-left view
GingerbreadPC12.JPG
Back view
 


In-the-making pics....

GingerbreadPC13.JPG
I made stencils for my cardboard
mockup by folding paper.
GingerbreadPC14.JPG
Determining size
GingerbreadPC15.JPG
Determining size
GingerbreadPC16.JPG
Ready to cut?
GingerbreadPC17.JPG
cutting out cardboard for the mockup
GingerbreadPC18.JPG
cutting out more sides
GingerbreadPC19.JPG
Missing roof
GingerbreadPC20.JPG
closeup missing roof
GingerbreadPC21.JPG
assembled mockup
GingerbreadPC22.JPG
assembled mockup
GingerbreadPC23.JPG
mockup window to show video card
GingerbreadPC27.JPG
Hardboard cutouts
GingerbreadPC28.JPG
Hardboard cutouts
GingerbreadPC29.JPG
Almost assembled
GingerbreadPC24.JPG
Test layout
GingerbreadPC25.JPG
Decorating
GingerbreadPC26.JPG
Decorating
GingerbreadPC31.JPG
The platform
GingerbreadPC32.JPG
PSU, DVDROM, HDD on the underside
GingerbreadPC33.JPG
closeup
GingerbreadPC34.JPG
slight cable management
GingerbreadPC35.JPG
underside view from a different angle

See other weird computers I've made